Related Topics:
Hybrid Hvac Thermal Energy-
High temperature solar thermal energy storage
This review analyzes the status of this prominent energy storage technology, its major challenges, and future perspectives, covering in detail the numerous strategies proposed for the improvement o.
FAQs about High temperature solar thermal energy storage
Can high temperature solar thermal energy be stored long-term?
However, to provide continuous availability of this energy, it must be stored. This paper presents the state of the art on high temperature (573–1273 K) solar thermal energy storage based on chemical reactions, which seems to be the most advantageous one for long-term storage.
What are the properties of solar thermal energy storage materials?
2. The properties of solar thermal energy storage materials Applications like house space heating require low temperature TES below 50 °C, while applications like electrical power generation require high temperature TES systems above 175 °C .
Can high temperature thermal energy storage be sustainable?
This paper has also offered an updated review of the high temperature (573–1273 K) thermochemical TES system which have the potential to become an important part of sustainable handling of energy in a close future. The following conclusions that can State of the art on high temperature thermal energy storage for power generation.
Is high temperature solar thermal energy storage based on chemical reactions beneficial?
This paper presents the state of the art on high temperature (573–1273 K) solar thermal energy storage based on chemical reactions, which seems to be the most advantageous one for long-term storage. The paper summarizes the numerical, experimental and technological studies done so far.
What are the applications of thermal energy storage (TES)?
Applications for the TES can be classified as high, medium and low temperature areas. In high temperature side, inorganic materials like nitrate salts are the most used thermal energy storage materials, while on the lower and medium side organic materials like commercial paraffin are most used.
What is high temperature thermal energy storage?
Of all components, thermal storage is a key component. However, it is also one of the less developed. Only a few plants in the world have tested high temperature thermal energy storage systems. In this context, high temperature is considered when storage is performed between 120 and 600 °C.
-
New Energy Storage Research Project
Energy storage is a potential substitute for, or complement to, almost every aspect of a power system, including generation, transmission, and demand flexibility. Storage should be co-optimized with clean generation, transmission systems, and strategies to reward consumers for making their electricity use more flexible. Goals that aim for zero emissions are more complex and expensive than NetZero goals that use negative emissions technologies to achieve a reduction of 100%. The pursuit of a. The need to co-optimize storage with other elements of the electricity system, coupled with uncertain climate change impacts on demand and supply, necessitate advances in analytical tools to reliably and efficiently plan, operate, and. The intermittency of wind and solar generation and the goal of decarbonizing other sectors through electrification increase the benefit of adopting pricing and load management options that reward all consumers for shifting. Lithium-ion batteries are being widely deployed in vehicles, consumer electronics, and more recently, in electricity storage.
[PDF Version]
-
China s communication base station flywheel energy storage hybrid power supply
Upon completion, it is expected to become the first independent flywheel + lithium battery hybrid energy storage power station in China, capable of meeting both frequency regulation and peak shaving demands, thus contributing to the safe and stable operation of the power grid.
FAQs about China s communication base station flywheel energy storage hybrid power supply
Where is China's largest flywheel energy storage system located?
Home » Clean Technology » China Connects World's Largest Flywheel Energy Storage Project to the Grid China has connected its first large-scale, grid-connected flywheel energy storage system to the power grid in Changzhi, Shanxi Province.
What is China's biggest flywheel system?
China has connected the world's biggest flywheel system to its national grid. Built in the city of Changzhi, Shanxi Province, the $48m Dinglun Flywheel Energy Storage Power Station can store 30MW of energy in kinetic form, the Interesting Engineering website reports.
What is the Dinglun flywheel energy storage power station?
The Dinglun Flywheel Energy Storage Power Station, the World's Largest Flywheel Energy Storage Project, represents a significant step forward in sustainable energy. Its role in grid frequency regulation and support for renewable energy will help stabilize power systems as China continues to increase its reliance on wind and solar energy.
What is flywheel energy storage technology?
Flywheel energy storage technology is a mechanical energy storage form. It works by accelerating the rotor (flywheel) at a very high speed. This maintains the energy as kinetic energy in the system. This technology has high power and energy density, rapid response and is highly efficient in comparison to pumped hydro or compressed air.
What is a high-speed magnetic levitation flywheel storage system?
This flywheel storage system, developed by Shenzhen Energy Group with technology from BC New Energy, consists of 120 high-speed magnetic levitation flywheel units. These units are designed to store energy in the form of kinetic energy by spinning flywheels at high speeds.
Who built the world's biggest flywheel system?
BC New Energy was the technology provider and Shenzhen Energy Group was the principal investor. The Dinglung project takes the title of world's biggest flywheel system from the 20MW Beacon Power flywheel station in Stephentown, New York. This went live in 2014 and cost $52m to build.
-
Hybrid energy storage microgrid operation control
In a microgrid, a hybrid energy storage system (HESS) consisting of a high energy density energy storage and high power density energy storage is employed to suppress the power fluctuation, ens.
FAQs about Hybrid energy storage microgrid operation control
Is unified hierarchical control for power distribution among AC microgrids based on hybrid energy storage?
Abstract: This study proposes unified hierarchical control for power distribution among AC microgrids based on hybrid energy storage. In this study, each microgrid comprises hybrid energy storage (i.e., supercapacitor, battery, and hydrogen) and renewable power generator (i.e., photovoltaic module).
What is a hierarchical control framework for a hybrid energy storage integrated microgrid?
This study introduces a hierarchical control framework for a hybrid energy storage integrated microgrid, consisting of three control layers: tertiary, secondary, and primary. The control performance is assessed under various operating modes, including islanded, grid-connected, and ancillary service mode.
What are the control layers of a hybrid energy storage integrated microgrid?
Secondary layer provides the frequency support to the main grid. Primary layer utilizes BF-ASMC for accurate tracking and stability. This study introduces a hierarchical control framework for a hybrid energy storage integrated microgrid, consisting of three control layers: tertiary, secondary, and primary.
Does a distributed microgrid need an energy storage system?
In recent years, distributed microgrid technology, including photovoltaic (PV) and wind power, has been developing rapidly, and due to the strong intermittency and volatility of renewable energy, it is necessary to add an energy storage system to the distributed microgrid to ensure its stable operation [2, 3].
How resilient are microgrids with hybrid energy storage system?
Microgrids are usually integrated into electrical markets whose schedules are carried out according to economic aspects, while resilience criteria are ignored. This paper shows the development of a resilience-oriented optimization for microgrids with hybrid Energy Storage System (ESS), which is validated via numerical simulations.
What is a case study in a microgrid?
A case study is used to provide a suggestive guideline for the design of the control system. In a microgrid, a hybrid energy storage system (HESS) consisting of a high energy density energy storage and high power density energy storage is employed to suppress the power fluctuation, ensure power balance and improve power quality.
-
Disadvantages of Hybrid Energy Storage System
After learning about the disadvantages of hybrid inverter, let's cover another aspect of hybrid inverters which is inverter coolant. The cooling system of your hybrid inverter isin charge of channeling that hea.
FAQs about Disadvantages of Hybrid Energy Storage System
What are the disadvantages of hybrid solar energy systems?
As with many things in life, there can also be some disadvantages to hybrid solar energy systems. Here's a few of them: Because different sources of energy are used, it is helpful to be knowledgeable about those systems. The operation of different energy sources and the interaction between them can become complicated.
What are the benefits and disadvantages of a hybrid energy stack?
Let's explore some of the benefits and disadvantages of a hybrid energy stack. Reliability: Hybrid systems give you a single power source. Cost Savings: Less reliance on traditional energy means lower operational costs over time. Sustainability: Generate renewable energy to meet your environmental goals and decarbonization targets.
What are the disadvantages of hybrid inverter?
Here are a few examples of the disadvantages of hybrid inverter: 1. Controlling Process is Difficult Because it involves several different kinds of energy, each with its own unique method of measurement and regulation. It may be challenging to manage the operation of multiple energy sources and their interactions. 2. Expensive Installation
What are the benefits of hybrid energy storage systems?
Hybrid systems can offer high power output, quick response times, and long-term energy storage capacity by mixing various types of ESSs [3, 4]. The increased need for renewable energy, grid stability, and energy independence have all contributed to the recent rapid growth of the worldwide energy storage market.
What are the advantages of a hybrid solar system?
A key advantage of the hybrid solar system over a traditional one is that it delivers continuous power. Because the batteries connected tohybrid solar systems store energy, they provide continuous power without interruption. Duringpower outages, the batteries work as inverters to provide you with backup power for your home and important appliances.
What is a hybrid solar energy system?
A hybrid solar energy system is when your solar is connected to the grid, with a backup energy storage solution to store your excess power. The hybrid solar energy systems have various advantages. Let's examine a few of them: A key advantage of the hybrid solar system over a traditional one is that it delivers continuous power.
-
Thermal difference energy storage generator
Power costs increasing, environmental pollution and global warming are issues that we are dealing with in the present time. To reduce their effects, scientists are focusing on improving energy harvesting-based.
FAQs about Thermal difference energy storage generator
What is a heat storage thermoelectric generator?
Heat storage thermoelectric generators, consisting of a heat storage unit, TEG and heat sink, have been demonstrated ( Kiziroglou et al., 2014). A heat storage unit is used to capture or release thermal energy, which transforms ambient temperature variations into the temperature difference on the TEG.
Can thermoelectric generators recover waste thermal energy?
In this paper, we presented an in-depth analysis of thermoelectric generators for the recovery of waste thermal energy in various sectors using the latest advanced thermoelectric generators designs, materials, and technologies.
How do solar thermal collectors and thermoelectric generators work together?
Solar thermal collectors and thermoelectric generators (TEGs) work in tandem to harness the ample solar energy available and convert it into electrical power. Similarly, thermoelectric generators (TEGs) have the capability to harness the thermal energy derived from geothermal systems located in locations with geothermal activity.
Can a thermoelectric generator convert ambient temperature fluctuations into electricity?
This article demonstrates a new approach using a thermoelectric generator (TEG), which converts thermal energy from ambient temperature fluctuations into electricity for the power source of portable devices.
How does temperature affect the power generation capability of a thermoelectric generator?
The temperature of the heat source significantly affects the power generation capability of a thermoelectric generator (TEG). The power generation of a thermoelectric generator (TEG) is directly influenced by the temperature gradient between its hot and cold sides.
Can a solar thermoelectric generator improve the efficiency of power generation?
The findings suggest that the utilisation of a solar thermoelectric generator featuring a well-thought-out thermal design can effectively optimise the advantageous characteristics of thermoelectric materials and substantially improve the efficiency of power generation .
-
Energy storage cabinet technology research
Based on the current research status of industrial and commercial energy storage cabinets, this project intends to study the integrated technology of industrial and commercial energy storage with high energy density and design a cabinet with high protection levels, high structural strength, and consistent temperature.
FAQs about Energy storage cabinet technology research
Which energy storage technologies can be used in a distributed network?
Battery, flywheel energy storage, super capacitor, and superconducting magnetic energy storage are technically feasible for use in distribution networks. With an energy density of 620 kWh/m3, Li-ion batteries appear to be highly capable technologies for enhanced energy storage implementation in the built environment.
What is energy storage technology?
It is employed in storing surplus thermal energy from renewable sources such as solar or geothermal, releasing it as needed for heating or power generation. Figure 20 presents energy storage technology types, their storage capacities, and their discharge times when applied to power systems.
Which energy storage system is suitable for centered energy storage?
Besides, CAES is appropriate for larger scale of energy storage applications than FES. The CAES and PHES are suitable for centered energy storage due to their high energy storage capacity. The battery and hydrogen energy storage systems are perfect for distributed energy storage.
What is the complexity of the energy storage review?
The complexity of the review is based on the analysis of 250+ Information resources. Various types of energy storage systems are included in the review. Technical solutions are associated with process challenges, such as the integration of energy storage systems. Various application domains are considered.
What are the most popular energy storage systems?
This paper presents a comprehensive review of the most popular energy storage systems including electrical energy storage systems, electrochemical energy storage systems, mechanical energy storage systems, thermal energy storage systems, and chemical energy storage systems.
What should be included in a technoeconomic analysis of energy storage systems?
For a comprehensive technoeconomic analysis, should include system capital investment, operational cost, maintenance cost, and degradation loss. Table 13 presents some of the research papers accomplished to overcome challenges for integrating energy storage systems. Table 13. Solutions for energy storage systems challenges.
-
Power station energy storage methods
Stationary energy storage technologies broadly fall into three categories: electro-chemical storage, namely batteries, fuel cells and hydrogen storage; electro-mechanical storage, such as compressed air storage, flywheel storage and gravitational storage; and thermal storage, including sensible, latent and thermochemical storage.
FAQs about Power station energy storage methods
What are energy storage solutions for electricity generation?
Energy storage solutions for electricity generation include pumped-hydro storage, batteries, flywheels, compressed-air energy storage, hydrogen storage and thermal energy storage components. The ability to store energy can facilitate the integration of clean energy and renewable energy into power grids and real-world, everyday use.
What are energy storage systems?
Energy storage systems allow energy consumption to be separated in time from the production of energy, whether it be electrical or thermal energy. The storing of electricity typically occurs in chemical (e.g., lead acid batteries or lithium-ion batteries, to name just two of the best known) or mechanical means (e.g., pumped hydro storage).
What is a battery energy storage system?
A battery energy storage system (BESS) is an electrochemical storage system that allows electricity to be stored as chemical energy and released when it is needed. Common types include lead-acid and lithium-ion batteries, while newer technologies include solid-state or flow batteries.
Why is electricity storage system important?
The use of ESS is crucial for improving system stability, boosting penetration of renewable energy, and conserving energy. Electricity storage systems (ESSs) come in a variety of forms, such as mechanical, chemical, electrical, and electrochemical ones.
How does energy storage work?
The so-called battery “charges” when power is used to pump water from a lower reservoir to a higher reservoir. The energy storage system “discharges” power when water, pulled by gravity, is released back to the lower-elevation reservoir and passes through a turbine along the way.
Which energy storage technologies can be used in a distributed network?
Battery, flywheel energy storage, super capacitor, and superconducting magnetic energy storage are technically feasible for use in distribution networks. With an energy density of 620 kWh/m3, Li-ion batteries appear to be highly capable technologies for enhanced energy storage implementation in the built environment.
-
Palau Energy Storage Cell Project
Philippine renewable energy firm Alternergy and its subsidiary Solar Pacific Energy Corporation (SPEC) have recently launched the Republic of Palau's first solar and battery energy storage system (BESS) project in Ngatpang state on Babeldoab island.
FAQs about Palau Energy Storage Cell Project
When did Palau launch its first solar and battery energy storage system?
Palau on June 3 launched its first solar and battery energy storage system (BESS) project on Friday. The project was made possible by Renewable company Alternergy Holdings Corp. and its subsidiary Solar Pacific Energy Corporation.
What is the Palau solar battery project?
The Palau Solar Battery Project will be the largest such project in the Western Pacific. It will lessen Palau's imported fuel dependency, a major step towards its ambitious goal of 100%.
What is Palau's energy storage system?
energy storage system, was undertaken by Solar Pacific Pristine Power, a privately owned company. The plant will provide approximately 20 per cent of Palau's power needs, delivering up to 23,000 megawatt hours per year to the grid network, reducing Palau's reliance on expensive diesel generators.
Who made Palau solar project possible?
The project was made possible by Renewable company Alternergy Holdings Corp. and its subsidiary Solar Pacific Energy Corporation. In a press release from the company, it said the Palau solar project boasts a capacity of 15.3 MWp solar PV and 12.9 MWh BESS, making it one of the most significant foreign direct investments in the country.
How much does Palau solar project cost?
In a press release from the company, it said the Palau solar project boasts a capacity of 15.3 MWp solar PV and 12.9 MWh BESS, making it one of the most significant foreign direct investments in the country. The project cost USD29 million, the venture marks a remarkable milestone for Alternergy.
How will solar energy be produced in Palau?
Solar electricity will be produced by a hybrid 15.3 MWdc (13.2 MWac) solar photovoltaic (PV) plus 10.2 MWac/12.9 MWh battery energy storage system facility. Extensive safeguards to protect Palau's pristine environment SPEC did not leave any stone unturned to protect the pristine Palau ecosystem.
-
Lithium battery container energy storage standard
The IMDG Code Amendment 42-24 is the cornerstone of the updated regulations, bringing significant changes to the classification, packaging, and handling of lithium-ion batteries and their associated technologies.
FAQs about Lithium battery container energy storage standard
Do battery energy storage systems look like containers?
C. Container transportation Even though Battery Energy Storage Systems look like containers, they might not be shipped as is, as the logistics company procedures are constraining and heavily standardized. BESS from selection to commissioning: best practices38 Firstly, ensure that your Battery Energy Storage System dimensionsare standard.
What is a lithium battery storage guideline?
It is a guideline that outlines safe storage practices, including the charging and discharging of lithium-ion batteries, lithium metal batteries, and hybrid lithium batteries. If you would like to learn more about shipping of lithium batteries, we wrote this guide about just that.
What is a battery energy storage system container?
A Battery Energy Storage System container is more than a metal shell—it is a frontline safety barrier that shields high-value batteries, power-conversion gear and auxiliary electronics from mechanical shock, fire risk and harsh climates.
What are the classification and shipping requirements for lithium-ion batteries?
The classification and shipping requirements for lithium-ion batteries depend on their size and energy capacity (Watt-hours). For standalone batteries. Strict UN-certified packaging. IUMI strongly supports the SoC limit of 30% for air freight and advocates similar principles for maritime transport.
What are the requirements for lithium-bearing energy carrier storage?
PGS 37-2 provides detailed requirements for numerous aspects of lithium-bearing energy carrier storage. Here are some key areas the guideline covers: Storage Limits: The maximum permitted quantities of energy carriers that can be stored in different types of facilities are defined.
What are the key standards for lithium ion cells?
Here's a breakdown of key standards at each level: IEC 62619 and IEC 63056 ensure safety and performance for industrial lithium-ion cells. UL 1642 and UN 38.3 verify safety and transport compliance of lithium cells. RoHS and REACH (NPS) ensure environmental and chemical safety.
-
Israel s new energy storage industry
Israeli companies are stepping up to this challenge, leveraging the country's strengths in materials science, electrochemistry, and software engineering to create next-generation storage technologies.
FAQs about Israel s new energy storage industry
How much does a battery cost in Israel?
Israel's storage tender sets prices between $0.0056 and $0.0085 per kW, with kWh figures therefore at $49.41 to $74.20 per kWh. Israel has awarded contracts for 1.5 GW of high-voltage battery storage capacity across three regions, marking a significant milestone in the country's energy transition.
What is the Israeli energy storage Council?
Based at Bar-Ilan but to be run in conjunction with the Technion-Israel Institute of Technology in the northern city of Haifa, the body will oversee the development, training, and commercialization of energy storage technologies.
How much storage capacity will allied infrastructure have in Israel?
These projects will have a total storage capacity of 1,300 MWh, potentially increasing to 1,900 MWh after entering the deregulated market. Ormat Technologies, in partnership with Allied Infrastructure, also announced it won tolling agreements for 300 MW/1,200 MWh of storage, marking its entry into Israel's large-scale energy storage sector.
How much money does Israel spend on a new research institute?
The institute's innovative research infrastructure will serve all researchers in Israel, and its establishment is very significant news.” The Energy Ministry provided NIS 100 million ($28.4 million) for the new institute, with Bar-Ilan funding the remaining NIS 30 million ($8.5 million).
How many MW of electricity will be built in Israel?
Northern Israel: Bi-Liht, Noy Agira, Allied, and Ormat will develop four facilities totaling 520 MW at an average tariff of 2.0 agorot per kW. Arava: Enlight and EDF will establish three projects with a combined capacity of 420 MW at a 3.0 agorot/kW tariff.
What does IEA's energy auction mean for Israel?
The auction, managed by the Israeli Electricity Authority (IEA), will facilitate the deployment of large-scale energy storage systems designed to integrate more renewable energy into the grid. With total investments estimated at ILS 3 billion (~$840 million), the projects are expected to commence operations in 2027.
-
Argentina Energy Storage Project
The Ministry of Economy of Argentina has issued a national and international open call "GBA Storage -AlmaGBA", aimed at contracting 500 MW of electric energy storage plants in critical nodes in the Metropolitan Area of Buenos Aires.
FAQs about Argentina Energy Storage Project
Does Argentina have a battery energy storage system?
Argentina has taken a major step toward modernizing its energy infrastructure with the launch of a 500 MW battery energy storage system (BESS) tender under the AlmaGBA program.
Does Argentina have a battery storage tender?
Argentina has opened a $500 million battery storage tender aimed at adding 500 MW of new energy storage capacity in the Buenos Aires metropolitan area. The AlmaGBA program, managed by CAMMESA, offers long-term contracts with fixed payments and financial guarantees to attract developers.
How many MW of battery energy storage will be deployed in Buenos Aires?
The initiative aims to deploy 500 MW of battery energy storage systems (BESS) in the Greater Buenos Aires Area (GBA), but the submitted capacity has far exceeded expectations—reaching a combined 1,347 MW
Why is energy storage important in Argentina?
The implementation of storage solutions aims to prevent power outages, improve system efficiency, and ensure a stable electricity supply during high-demand periods. This initiative marks Argentina's first large-scale adoption of energy storage technology.
What is Argentina's first energy storage tender?
(USD 1.0 = EUR 0.860) Loading... Argentina's first energy storage tender has lured proposals for 1,347 MW of combined capacity, indicating a high investor interest that significantly exceeded the 500-MW target.
Who will sign the energy storage contracts in Buenos Aires?
The energy storage contracts will be signed with leading electricity distributors in Buenos Aires, Edenor, and Edesur, while the Wholesale Electricity Market Administration Company (CAMMESA) will be the guarantor.
-
Photovoltaic energy storage station battery
Energy Storage Batteries: These batteries store surplus energy generated by the photovoltaic system and release it during peak demand, helping balance energy supply and demand while reducing pressure on the grid.
FAQs about Photovoltaic energy storage station battery
What is a battery energy storage system?
Battery Energy Storage Systems (BESS) have become a cornerstone technology in the pursuit of sustainable and efficient energy solutions. This detailed guide offers an extensive exploration of BESS, beginning with the fundamentals of these systems and advancing to a thorough examination of their operational mechanisms.
What is a photovoltaic (PV) system?
When combined with Battery Energy Storage Systems (BESS) and grid loads, photovoltaic (PV) systems offer an efficient way of optimizing energy use, lowering electricity expenses, and improving grid resilience.
Can photovoltaic energy storage systems be used in a single building?
Photovoltaic with battery energy storage systems in the single building and the energy sharing community are reviewed. Optimization methods, objectives and constraints are analyzed. Advantages, weaknesses, and system adaptability are discussed. Challenges and future research directions are discussed.
Can a battery store PV power?
The battery of the second system cannot only store PV power, but also store power from the grid at low valley electricity prices. In particular, the stored power can be supplied to the buildings and sold to the grid.
What are energy storage systems?
Energy-storage systems designed to store and release energy over extended periods, typically more than ten hours, to balance supply and demand in power systems. Reduction of energy demand during peak times; battery energy-storage systems can be used to provide energy during peak demand periods.
What types of battery technologies are being developed for grid-scale energy storage?
In this Review, we describe BESTs being developed for grid-scale energy storage, including high-energy, aqueous, redox flow, high-temperature and gas batteries. Battery technologies support various power system services, including providing grid support services and preventing curtailment.
-
Capacity of wind and solar energy storage power station
In this paper, a wind-solar combined power generation system is proposed in order to solve the absorption problem of new energy power generation. Based on the existing installed capacity of local wind power.
FAQs about Capacity of wind and solar energy storage power station
Does a combined power generation system optimize energy storage capacity?
The above research on combined power generation systems only stays in dispatch optimization and configuration of energy storage capacity, and does not optimize the capacity configuration of other power sources in the power generation system, nor does it consider the fluctuation of the power grid caused by load uncertainty.
How can wind energy storage be used in a traditional wind farm?
To sum up, in the face of problems such as large abandoned air volume and uncertain output of traditional wind farms, there are two solutions commonly adopted by researchers. One method is to equip energy storage system on the basis of traditional wind power generation system, and build a combined operation mode of wind storage.
How does wind power affect heat storage system?
According to the fluctuation of wind power, the operation of the heat storage system is adjusted. When the wind power fluctuates greatly, the CSP station can use its heat storage system to convert excess electric energy into heat energy for storage.
Why do we need CSP power stations in wind power generation?
The introduction of CSP power stations in wind power generation means to improve the absorption capacity of wind power generation by means of energy complementarity and balance the output fluctuations of the system.
What is a battery energy storage system (BESS)?
To overcome these challenges, battery energy storage systems (BESS) have become important means to complement wind and solar power generation and enhance the stability of the power system.
Does multi-energy complementary system with solar thermal power station work?
Most of the research on the multi-energy complementary system with solar thermal power station only stays on the configuration and optimization of energy storage capacity, but does not configure other power capacity according to the actual situation. In terms of model solving, many studies have adopted metaheuristics.