Browse technical resources about solar mounting systems, tracker technology, structural design, and installation best practices.
HOME / Ieee Std 2778 2020, Ieee Guide For Solar Power Plant - BeTheFuture Solar Foundation & Infrastructure
This report offers detailed insights into China's PV landscape, highlighting record-breaking growth and technological leadership in the global renewable energy transition.
In 2020, China's newly installed grid-connected photovoltaic capacity reached 48.2GW, a year-on-year increase of 60.1%, of which the installed capacity of centralized photovoltaic power plants was 32.7GW, a year-on-year increase of 82.68%; the installed capacity of distributed photovoltaic power plants was 15.5GW, a year-on-year increase of 27.04%.
In 2021, China's newly installed grid-connected photovoltaic capacity reached 54.88GW, a year-on-year increase of 13.9%, of which the installed capacity of distributed photovoltaic power plants was 29.28GW, a year-on-year increase of 88.7%, and accounting for 53.4% of the total new installed capacity, and breaking 50% for the first time in history.
It has entered a rapid development stage (Li and Huang, 2020, Anon, 2022a). There are 676 rooftop solar photovoltaic (RTSPV) pilot projects in 31 provinces in China in 2021 (Anon, 2021a). Rooftop solar photovoltaics use building roof resources to design distributed photovoltaic power stations (Tripathy et al., 2016).
According to data released by the National Energy Administration, the cumulative total installed capacity of photovoltaic power generation in China in 2020 was 253GW, a year-on-year increase of 23.8%. As photovoltaics gradually enter the era of parity and 14-five-year plan, the installed capacity will show a more rapid growth trend.
In 2021, the new installed photovoltaic in China reached 54.88GW, with a year-on-year growth of 13.9%. The cumulative grid connected installed capacity reached 306GW, ranking first in the world in terms of new and cumulative installed capacity. Among them, 25.6GW and 29.28GW of centralized and distributed photovoltaic were added respectively.
In this paper, we present an assessment method for the PV power generation potential of rooftop in China. Using machine learning model processes the big data that consists of the gross domestic product, building footprint, road length and population, at a high geographic resolution of 10 km by 10 km.
Wall-mounted solar panels are solar energy systems designed to be installed vertically on building exteriors, offering an alternative to traditional rooftop panels.
Our first-ever wall-mounted solar panel installation was a great success. This was also the first ever experience I had with installing solar panels. The system comprised four panels mounted in landscape mode. We used unistrut rails to mount the panels. The mounting rail and stages of progress of installing wall panels.
Roof-mounted solar panels are usually titled at a 20-50 degree angle, which allows them to capture sunlight when the sun is high in the sky. But most wall-mounted panels are parallel to the wall, or only slightly tilted. It's also harder to fit as many solar panels on a wall as you would on a roof.
To maximise energy absorption, you need to make sure to install the wall-mounted systems strategically. You can do this by placing the solar panels directly parallel to the wall, tilting them away from the wall or overhanging them. The natural slope of wall-mounted solar panels requires special mounting hardware to ensure security.
The winter sun is relatively low in the UK, and energy usage typically increases during winter. Therefore, wall-mounted panels can be particularly beneficial here. Without projecting a panel beyond 200mm from the wall, from the wall, you can mount a typical panel with dimensions 170cm by 110cm at around 80°.
Without projecting a panel beyond 200mm from the wall, from the wall, you can mount a typical panel with dimensions 170cm by 110cm at around 80°. A wall-mounted panel gives much better consistency and peaks in spring and autumn compared to the summer. Yearly production ~290kWh. There are multiple options for mounting panels on a wall.
While wall-mounted panels are generally less efficient than roof-mounted ones, they can be viable in certain scenarios. South-facing walls offer the best sunlight exposure. The tilt and direction of panels are crucial for optimising efficiency, with a 60-degree angle ideal for capturing low winter sun.
So how much area is required by solar power plants then? That depends on the amount of kW of MW you would like to accommodate. A simple rule of thumb is to take 100 sqft for every 1kW of solar panels.
A photovoltaic power station, also known as a solar park, solar farm, or solar power plant, is a large-scale grid-connected photovoltaic power system (PV system) designed for the supply of merchant power.
Large-scale solar PV power plants mostly tend to locate on the areas with rich vegetation cover and close to grid lines. Spatial predictions of solar photovoltaics installations probability using three ML models presented a consistent distribution pattern.
The World Bank has published the study Global Photovoltaic Power Potential by Country, which provides an aggregated and harmonized view on solar resource and the potential for development of utility-scale photovoltaic (PV) power plants from the perspective of countries and regions.
To maximize the development of commercial resources and to minimize the impact of various issues, a number of evaluation criteria (such as availability of resources, climatic, ecological, and socio-economic factors) must be considered for determining suitable location for a large-scale solar PV power plant installation .
It is assumed that the installed PV power station has a relatively ideal geographical location, which is jointly determined by investment decision makers and experts . The modeling procedures of evidence-based location choices of solar PV power plants with machine learning methods are shown in Fig. 1.
The new methodological proposal that includes the procedures for choosing and weighting the criteria that allow the optimal location of a solar photovoltaic plant can be extrapolated and therefore applied to any country, territory, or area of interest anywhere in the world.
The rain itself won't stop them generating energy - the corresponding cloud cover that comes with rain will reduce the output of your system, but the effect is no more than a cloudy day with no sun.
If not, I will have to assume that tripping the RCD in wet weather has a different source and the PV system has nothing to do with it. The solar panels produce DC voltage, that is then converted to AC and stabilised before being applied to your mains. As such the technician is correct that the panels are not directly connected to the mains.
We have had no history of our RCD tripping until solar panels were fitted last month. Since then our RCD frequently trips when it rains. The technician who fitted the PV system told me it couldn't be anything to do with that, as the solar cell wiring was entirely separate from the house wiring which the RCD was protecting.
This is isolate the tripping problem from the household circuits. It is not ideal the solar pv sharing an RCD as the solar pv will have residual current and this coupled with any residual current already existing on the household circuits could well be enough to cross the tripping threashold of the 30mA RCD.
The issue with the PV being fed from the shared isn't just nuisance tripping. It will also affect disconnection times. If there is a fault of one of the circuits which are protected by the RCD, say for example the sockets, then the RCD will operate yet the PV system will still be feeding power to the circuit.
You can't supply the inverter through the RCD. It will cause the RCD to trip Start with switching the DC breaker off at the inverter so the panels aren't supplying the inverter with any power and then wet the panels again and see if the RCD trips. If the RCD does trip then this is definitely an AC problem.
You have an “upfront” RCD straight after the meter so any fault on your domestic or solar electrics could cause it to trip. Or there could always have been a residual leakage just under the trip sensitivity of the up front RCD hence the added leakage from the inverter now producing the trips.
A state-owned power company in Uzbekistan has signed a power purchase agreement (PPA) with Voltalia for a large-scale clean energy project combining solar PV, wind and battery storage.
Stand-alone photovoltaic power systems are independent of the utility grid and may use solar panels only or may be used in conjunction with a diesel generator, a wind turbine or batteries.
A system connected to the utility grid is known as a grid-connected energy system or a grid-connected PV system. Through this grid-tied connection, the system can capture solar energy, transform it into electrical power, and supply it to the homes where various electronic devices can use it.
The different solar PV configurations, international/ national standards and grid codes for grid connected solar PV systems have been highlighted. The state-of-the-art features of multi-functional grid-connected solar PV inverters for increased penetration of solar PV power are examined.
Connecting solar power directly to National Grid's transmission network marks a significant step in the renewable energy transition, allowing clean energy to be transported over greater distances and opening a gateway for larger projects to connect to the grid.
Thus, many countries have established new requirements for grid integration of solar photovoltaics to address the issues in stability and security of the power grid. In this paper, a comprehensive study of the recent international grid codes requirement concerning the penetration of PVPPs into electrical grids is provided.
For most households, a 1 KW to 10 KW grid-connected PV system is enough. In fact, an average Indian household can very well function on a 3 KW grid-tied solar system. Q. What happens to the on-grid inverter during a power failure? During a power failure, the on-grid inverter disconnects the photovoltaic system from the grid. Q.
Through this grid-tied connection, the system can capture solar energy, transform it into electrical power, and supply it to the homes where various electronic devices can use it. When the grid-connected PV system is installed on residential or commercial rooftops, it provides solar electricity to all the electrical ports and sockets.
Concentrated solar power (CSP, also known as concentrating solar power, concentrated solar thermal) systems generate by using mirrors or lenses to concentrate a large area of sunlight into a receiver. is generated when the concentrated light is converted to heat (), which drives a (usually a ) connected to an.
Learn the basics about concentrating solar power and how this technology generates energy. What is concentrating solar-thermal power (CSP) technology and how does it work? CSP technologies use mirrors to reflect and concentrate sunlight onto a receiver. The energy from the concentrated sunlight heats a high temperature fluid in the receiver.
In solar thermal energy, all concentrating solar power (CSP) technologies use solar thermal energy from sunlight to make power. A solar field of mirrors concentrates the sun's energy onto a receiver that traps the heat and stores it in thermal energy storage till needed to create steam to drive a turbine to produce electrical power.
Concentrated solar technology systems use mirrors or lenses with tracking systems to focus a large area of sunlight onto a small area. The concentrated light is then used as heat or as a heat source for a conventional power plant (solar thermoelectricity).
The heat can then be used to create steam to drive a turbine to produce electrical power or used as industrial process heat. Concentrating solar power plants built since 2018 integrate thermal energy storage systems to generate electricity during cloudy periods or hours after sunset or before sunrise.
The concentrated light is then used as heat or as a heat source for a conventional power plant (solar thermoelectricity). The solar concentrators used in CSP systems can often also be used to provide industrial process heating or cooling, such as in solar air conditioning.
Concentrated solar power systems require a significant amount of land with direct sunlight or irradiance. Because of this, there are limited places to build these types of systems. CSP systems tend to be large, utility-scale projects capable of providing a lot of electricity as a power source to the grid.
This article provides a comprehensive overview of the current state of large-scale PV projects in Romania, covering project details, readiness levels, key players, and the overall impact on the energy sector and the environment.
Romania has set ambitious targets for developing renewable energy sources, including solar power. This article provides a comprehensive overview of the current state of large-scale PV projects in Romania, covering project details, readiness levels, key players, and the overall impact on the energy sector and the environment.
Overview of solar PV developments Following a period of lull, Romania has achieved in 2023 a significant milestone in its renewable energy journey – over 1 GW of new solar capacity installed in one year between distributed generation and utility scale projects.
Some of the most notable schemes include: Feed-in-tariff (FIT) scheme: Under this scheme, renewable energy producers in Romania, including solar energy producers, are guaranteed a fixed price for their electricity for 15 years. The FIT rates for solar energy are revised every year, and they depend on the type and size of the solar project.
Romania is undergoing a significant expansion in solar power within its broader energy transition framework, bolstered by European funding and legal reforms.
Although Romania is joining the European photovoltaic revolution relatively late, its commitment to renewable energy puts it in a prime position to benefit from the EU's rapidly increasing grid investments. The country's grid is aging much like in many other countries, but the local regulations are also catching up quickly.
This was the first time the plants' output exceeded 1 GW, local sources reported. Based on estimates from the Romanian Photovoltaic Industry Association (RPIA), the country's aggregate photovoltaic capacity can reach 11,2 GW by 2030.
Liquid fuels Natural gas Coal Nuclear Renewables (incl. hydroelectric) Source: EIA, Statista, KPMG analysis Depending on how energy is stored, storage technologies can be broadly divided into the following three categories: thermal, electrical and hydrogen (ammonia). The electrical. Electrochemical Li-ion Lead accumulator Sodium-sulphur battery Electromagnetic Pumped storage Compressed air energy storage When it comes to energy storage, there are specific application scenarios for generators, grids and consumers. Generators can use it to match production with. Independent energy storage stations are a future trend among generators and grids in developing energy storage projects. They can be monitored and.
According to CNESA data, the capacity of independent energy storage stations planned or under construction in China in the first half of 2022 was 45.3GW, accounting for over 80% of all new energy storage projects planned or under construction.
EMI testing and high and low temperature testing services are also provided to ensure that the customers feel satisfied. The Zhangbei National Wind and Solar Energy Storage and Transmission Demonstration Project (China) has operated in a safe and stable condition for many years since it was put into operation on December 25, 2011.
The Zhangbei National Wind and Solar Energy Storage and Transmission Demonstration Project (China) is one of many cases administered by ICP DAS. Loading...
In terms of developments in China, 19 members of the National Power Safety Production Committee operated a total of 472 electrochemical storage stations as of the end of 2022, with a total stored energy of 14.1GWh, a year-on-year increase of 127%.
From an international perspective, the IEA estimates that China will have the highest installed electrochemical energy storage capacity by 2026, accounting for 22% of the global total. By then, China will be on a par with Europe and outstrip the US by 7 percentage points (Figure 5). 2.
However, the scale of new independent energy storage stations put into operation in China in the first three quarters of 2022 was approximately 345.5MW, which was significantly lower than planned or under construction stations. The main reason for this may be that investors lack motivation.
A 133 MW hybrid solar-wind power plant linked to 242 MWh of storage is currently being built in a hilly area in South Korea. Chinese supplier JA Solar has provided the modules for the PV section.
Located in a 2.96 million square meters mountainous site in Daemyeong, Yeongam, about 340 km south of Seoul, the PV project is a part of the South Korean largest hybrid energy system integrating PV, wind and energy storage, featuring agility within a complicated landform and high humidity environment.
The project, recently put into commercial operation, is in Yeongam, South Jeolla province, South Korea. It is noteworthy as one out of the only two solar projects of approximate 100 MW capacity in the country, and milestone application as of the largest hybrid energy systems in the region. Part of the Largest PV+Wind+Storage Complex in South Korea
Less than a decade ago, South Korean companies held over half of the global energy storage system (ESS) market with the rushed promise of helping secure a more sustainable energy future. However, a string of ESS-related fires and a lack of infrastructure had dampened investments in this market.
Daemyung Energy, the project's developer, will sell renewable energy certificate (REC) to Korea South-East Power for solar power over 20 years, expected to raise about 30 billion Korean Won (24.9 million USD) per year.
This was a heavy hit for the energy industry, but developments of safer technology and renewed state support have recently given new life to the domestic ESS market. According to South Korea's “10th Basic Plan for Electricity Supply and Demand,” the government aims to capture over 30 percent of the global ESS market by 2036.
With a strong 23-year track record in the PV space, Sungrow products power installations in over 120 countries, maintaining a worldwide market share of over 15%. Learn more about Sungrow by visiting
Danish renewable energy developer Copenhagen Energy has selected Chinese technology company Huawei to deliver the battery systems needed for a 132-MWh portfolio of energy storage facilities at home.
Danish renewable energy developer Copenhagen Energy has selected Chinese technology company Huawei to deliver the battery systems needed for a 132-MWh portfolio of energy storage facilities at home. Dubbed Everspring, the battery energy storage system (BESS) portfolio targets energisation in the spring of 2026.
In related news, Huawei Digital Power, in collaboration with SchneiTec, recently commissioned Cambodia's first TÜV SÜD-certified grid-forming energy storage project on June 11, 2025. This 12 MWh system includes a 2 MWh testbed that validated Huawei's grid-forming ESS technology.
In July, Danish company Energrid was hired as the engineering, procurement, and construction (ECP) contractor for the projects. Danish renewable energy developer Copenhagen Energy has selected Chinese technology company Huawei to deliver the battery systems needed for a 132-MWh portfolio of energy storage facilities at home.
Copenhagen Energy's 132 MWh Everspring battery energy storage system (BESS) portfolio will be supplied by Huawei Digital Power. Image: Huawei Digital Power. Copenhagen Energy's 132 MWh Everspring battery energy storage system (BESS) portfolio will source its technology from Huawei Digital Power.
The system's design incorporates multi-layered safety features, and its battery packs, designated “Panshi,” have undergone DNV-verified ignition tests. Huawei Digital Power is also recognized as a Tier 1 Power Inverter and Energy Storage Manufacturer by BNEF.
Huawei Digital Power is also recognized as a Tier 1 Power Inverter and Energy Storage Manufacturer by BNEF. It's not yet known if Huawei's Smart String Grid-Forming ESS platform will be used to provide grid support services, including inertia and short-circuit current. Grid-forming in Cambodia
Ottawa BESS 2 is a proposed up to 75 Mega-Watt (“MW”) lithium-ion battery storage Project located at 2393 8th Line Road, Ottawa, ON, K0A 2P0, under development by Ottawa BESS 2 Limited Partnership.
In 2025, the City of Ottawa established official plan and zoning provisions for battery energy storage uses in accordance with new Official Plan policy. BESS is an emerging technology using batteries and associated equipment to store excess energy from the electrical grid, which can then discharge energy in periods of high demand.
For our part, Hydro Ottawa views battery storage as more than just a technological advancement; it's a cornerstone to a more sustainable energy future. Our recent collaboration with The Ottawa Hospital includes the construction of a central utility plant which can also support a larger district energy system in the west downtown core.
Our recent collaboration with The Ottawa Hospital includes the construction of a central utility plant which can also support a larger district energy system in the west downtown core. This proposal includes 4 MW of battery storage.
Several battery energy storage system projects are currently underway in the province, including a 120 megawatt (MW) plant in York region and an 80 MW facility in the municipality of Lakeshore. And by summer 2025, Canada's largest energy storage facility with the capability to hold up to 250 MW of electricity will come online in Jarvis, Ontario.
This post has been updated with a comment from Evolugen's Geoff Wright. A proposed 250-megawatt battery storage project in Ottawa's rural west is down but not out, after the city's Agriculture and Rural Affairs Committee (ARAC) voted unanimously last week to reject the plan.
Well, soon, in Ontario, batteries will be very much included - and they'll be transformative. Several battery energy storage system projects are currently underway in the province, including a 120 megawatt (MW) plant in York region and an 80 MW facility in the municipality of Lakeshore.
A photovoltaic power plant is a large-scale PV system that is connected to the grid and designed to produce bulk electrical power from solar radiation. A photovoltaic power plant consists of several components, such as: 1. Solar modules: The basic units of a PV system, made up of solar cells that turn light into electricity. A concentrated solar power plant is a large-scale CSP system that uses mirrors or lenses to concentrate sunlight onto a receiver that heats a fluid that drives a turbine or engine to generate electricity. A concentrated solar power. Solar power plants have several advantages and disadvantages compared to other sources of energy. Some of them are: 1. Advantages: 1.1. Solar power plants use renewable and clean energy that does not emit. Solar power plants are systems that use solar energy to generate electricity. They can be classified into two main types: photovoltaic (PV) power plants and concentrated solar power (CSP) plants. Photovoltaic power plants.
[PDF Version]Definition of Solar Power Plants: Solar power plants generate electricity using solar energy, classified into photovoltaic (PV) and concentrated solar power (CSP) plants. Photovoltaic Power Plants: Convert sunlight directly into electricity using solar cells and include components like solar modules, inverters, and batteries.
A photovoltaic power station, also known as a solar park, solar farm, or solar power plant, is a large-scale grid-connected photovoltaic power system (PV system) designed for the supply of merchant power.
A solar power plant, whether small-scale or large-scale, operates on the fundamental principle of converting sunlight into electricity through photovoltaic cells. These cells are interconnected and arranged in a specific pattern within solar panels to optimize energy capture.
The working principle is that we use the energy of photons to get the drift current flowing in the circuit using reversed bias p-n junction diode (p-type and n-type silicon combination). 1. Solar Panels It is the heart of the solar power plant. Solar panels consists a number of solar cells. We have got around 35 solar cells in one panel.
A solar power station is a facility that generates electricity by converting sunlight into electricity using solar panels, which consist of multiple solar cells. These stations can range in size from a few kilowatts to hundreds of megawatts and can be installed on the ground, rooftops, or walls to harness direct sunlight efficiently.
Following are the two types of large-scale solar power plants: Concentrated solar power plants (CSP) or Solar thermal power plants. The process of converting light (photons) into electricity (voltage) is known as the solar photovoltaic (PV) effect. Photovoltaic solar energy cells convert sunlight into solar energy (electricity).
Consumers with a typical 3kWp Solar panel system could make combined saving and income of £628 per year. Having a solar PV system installed on your property can be a great way to reduce the cost you pay for your electricity. As with other solar products, photovoltaic solar systems. PV systems can be used for a building with a roof or wall that faces within 90 degrees south, as long as no other buildings or large trees overshadow it. If the roof surface is in shadow for parts of the day, the output of the.
It's recommended to get at least 3 quotes from different solar installers to compare prices and options. Getting multiple quotes allows you to find the best deal and ensures you have a good understanding of the available systems for your home. What information should be included in a solar panel quote?
A comprehensive solar panel quote should include the system size in kilowatts (kW), number and type of panels, inverter specifications, estimated annual energy production, total cost breakdown, warranty information and projected savings on electricity bills. The quote should also outline any additional costs like permits or roof modifications.
Fortunately, free services are available to receive non-binding quotes from up to four vetted solar panel installers, simplifying the process. However, keep in mind that these quotes typically have a 14-day validity due to rapidly changing factors such as technology advancements, shifting prices, and the volatility of the wholesale energy market.
You can get an instant solar quote by completing our . One of our expert and friendly solar account managers will contact you. How many quotes should I get for solar panels? It's recommended to get at least 3 quotes from different solar installers to compare prices and options.
Comparing multiple solar panel quotes is essential, as it allows homeowners to find the most suitable option in terms of system specifications, costs, energy production, and warranty coverage. Fortunately, free services are available to receive non-binding quotes from up to four vetted solar panel installers, simplifying the process.
The price in a solar panel quote is influenced by factors such as system size, panel quality, inverter type, roof complexity, local installation costs and any additional equipment like batteries. Can I refer my friend for a solar quote? Yes, you can refer a friend for a solar quote.
The qualification covers a range of topics, including safety considerations for working with electrical systems, components of photovoltaic systems, principles of photovoltaic power generation and the practical skills needed to install and maintain small scale systems. Upon successful completion of the qualification,. To undertake this course, you should fit the following entry requirements: 1. Be an experienced electrician. 2. Hold a valid level 3 certification in the BS7671:2018 Requirements for Electrical Installations (18th edition). 3. Hold a. A practical observed assignment and one online assessment with multiple choice and multiple response questions are used for assessment. The examinations are open-book and based on the relevant regulations & standards.
All Solar Panel (PV) Installation courses are provided at our state of the art renewable energy centre. Train on the UK's first and only real Solar PV training roof. Book today.
Our Solar PV Installation Course with battery storage is completed over 5 days. This qualification is specifically designed to equip individuals with the skills and knowledge they need to install, commission, fault find and maintain photovoltaic systems to the highest standards, in line with industry regulations and accepted codes of practice.
Solar PV training is designed for experienced electrical operatives and candidates need to have completed the 18th Edition Wiring regulations and have relevant Level 3 electrical qualifications/experience. Enrol on a reputable training program. GTEC's Solar PV course is accredited by LCL Awards, the UK's leading renewable Awarding Organisation.
During the course, you will receive practical training, including work on: Purpose-built solar pv rigs, featuring different types of modules, inverters, and roof mounting kits. Live equipment within a fully functioning plant room. You will also cover theory relating to health & safety, industry regulations and best-practice.
The solar photovoltaic installer course delivers the knowledge, skills and competency required to design, install, commission and maintain domestic and commercial solar PV systems. During the course, you will receive practical training, including work on:
Taking a solar panel installation course is a valuable investment for those looking to enter the energy sector and make a positive impact on the environment. Our Solar PV Course will equips you with the skills and knowledge to install, commission, fault find and maintain photovoltaic systems to the highest standards.
A photovoltaic system, also called a PV system or solar power system, is an electric power system designed to supply usable solar power by means of photovoltaics.
The application of solar PT-PV technology is an important way to achieve clean energy supply and energy conservation and emission reduction in building field. Simultaneously meeting the thermal and electric need of building is one of the main development directions of solar PT-PV energy supply system.
1. Introduction Solar photovoltaic (PV) technology is clean way of generating electric power directly from solar radiation. Its small to large isolated and grid connected applications have become common in various parts of the world.
PV systems convert light directly into electricity and are not to be confused with other solar technologies, such as concentrated solar power or solar thermal, used for heating and cooling.
Solar thermal/electric energy supply system based on HES is a sustainable energy solution. The system has many advantages. First, it improves solar energy utilization efficiency by converting solar energy into electricity and storing it for use at night or on cloudy days.
For solar PV systems, a special bi-directional electric meter is used to measure both the incoming energy from the utility, and the outgoing energy from the solar PV system. Finally, the wiring or electrical cables transport the electrical energy from and between each component and must be properly sized to carry the current.
The thermal and electric energy supply technology with solar energy utilization as the core for building, comprises solar PT technology, solar PV technology, and solar photothermal-photovoltaic (PT-PV) comprehensive technology. The solar PT technology started early and has developed rapidly in the field of building heating.